Track Saw Rail Holder

prusaprinters

<p>I had bought these track saw tracks and needed to store them and i came up with this holder for both of them. If you need only one track you can twist the knob 90 degrees and only the front track releases, if you turn the knob another 90 degrees, the second track gets released.&nbsp;</p><p>&nbsp;</p><p><strong>Printing</strong></p><p>The piece “Schienenhalter.stl” doesn't need support, but the “Drehteil.stl” does need a little bit of support.</p><p>Print them at any quality you like, i printed them at 0.2mm layer height with 40% infill and 3 perimeters.&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Installation</strong></p><p>Only a quick print and you can store your two track saw rails on a wall or on a door. The bottom piece gets screwed on the wall with up to three countersunken screws (i user 4,5x30mm wood screws, but use the screws you have) and the top piece needs one as well.</p><p>If you want to install this mount, please install the bottom piece first with the middle screw and use a level to level the piece. after it ist level, install the other two screws. After it is screwed to the wall, you can put one track on, so you can screw on the top piece.&nbsp;</p><p>Install the second track and you are done.</p>