TQ250 racing drone quad V2

thingiverse

This design has been updated to accommodate a larger camera on the upper deck while incorporating a mini FPV cam on the lower deck. The existing robust framework of the first version remains, with interchangeable arms designed for quick replacement in high-speed or impact situations. The landing legs have also been reinforced, and the overall structure is optimized for easy printing using small printers. Check out my first FPV flight here: http://2ld.nz/S To build this drone, I used the following components: Naze32 10DOF flight controller - found at http://2ld.nz/g ORX Full Range 2.4GHz 6 CH remote Controller - located at http://2ld.nz/f Drone Matters ESC (any other 12A ESC would also work) Sunny Sky X2204S 2300KV motors - available at http://2ld.nz/h props: found at http://2ld.nz/P cam: found at http://2ld.nz/Q FPV kit: located at http://2ld.nz/R The battery (3S 1500mAh) is securely attached underneath using Velcro for enhanced stability. The frame was assembled using M3 screws and bolts, while nylon spacers and screws were used to mount the controller and top deck in place.