Toy truck base

thingiverse

Fully Printable - No Support - No Glue - Single Color 3D Printer This is a truck base/platform, remixes for it are available for sale on https://www.cgtrader.com/sasha19md. Only the truck base/platform is contained in this thing, the tank/mixer/fire truck parts are not included! Example assemble video tutorials can be found here: https://youtu.be/EwvFrpBn-Vw https://youtu.be/vKf4fwXmXI4 https://youtu.be/RoyjeXNYWdg https://youtu.be/0nlt57LlyOc https://youtu.be/TJCMTOk385A The tolerance for pieces that need to fit tightly is 0.1mm, for pieces that need to allow movement (like screws and axles) 0.3mm or more. Printing List: 1x axle_back.stl - 0.16mm - no - gray 1x axle_front.stl - 0.16mm - no - gray 1x backhead_07.stl - 0.16mm - no - black-orange 2x back_light_with_flat_cut.stl - 0.16mm - no - orange 1x back_light_with_flat_cut.stl - 0.16mm - no - red 1x back_light_with_flat_cut.stl - 0.16mm - no - white 1x base_semitruck_short_left.stl - 0.16mm - no - gray 1x base_semitruck_short_right.stl - 0.16mm - no - gray 1x cabin_cap.stl - 0.16mm - no - blue 2x cap_double_rim.stl - 0.16mm - no - gray 2x cap_single_rim.stl - 0.16mm - no - gray 1x connector_simple_wheel_house.stl - 0.16mm - no - orange 1x exhaust.stl - 0.16mm - no - black 1x front_grill_07.stl - 0.16mm - no - orange-black-orange 1x front_lights.stl - 0.12mm - no - orange-white 2x rim_double.stl - 0.16mm - no - white 2x rim_single.stl - 0.16mm - no - white 1x screw_gear_knob.stl - 0.16mm - no - black 14x screw_l6mm.stl - 0.16mm - no - blue 15x screw_l9mm.stl - 0.16mm - no - black 4x screw_l13mm.stl - 0.16mm - no - orange 1x steering_wheel.stl - 0.16mm - no - black 4x tire_outter_cut.stl - 0.16mm - no - black(TPU) 2x tire_simple.stl - 0.16mm - no - black(TPU) 1x wheel_house_front_left.stl - 0.16mm - no - gray 1x wheel_house_front_right.stl - 0.16mm - no - gray 1x wheel_house_simple_left.stl - 0.16mm - no - gray 1x wheel_house_simple_right.stl - 0.16mm - no - gray Observations: All objects already have the intended print direction in the STL files. If you don't like the built-in supports for the cabin, then you can find only the cabin in cabin_your_own_support.stl. Most of the parts were printed with PLA. Only the tires and the mirrors were printed from TPU (flexible material). Screws... There are also sleeping screws STLs included, these are printed on the side which makes them a lot stronger. The drawback is that these don't close the holes completely... So use as many sleeping screws as you can if the toy is going to be played with, and only normal/round ones otherwise. A fire truck based on it in work...