Toy Train BNSF locomotive BRIO / IKEA compatible

thingiverse

You will need a BNSF diesel locomotive toy train that is compatible with BRIO or IKEA. This toy train requires the following screws to assemble it. Use 14 ISO 14585 (DIN7981) 2.9mm x 13mm screws to put everything together. You also need two more ISO 14585 (DIN7981) 2.9mm x 19mm screws. Add ring magnets on each side of the train. To do this, you will need two ISO 14585 (DIN7981) 2.9mm x 13mm screws, a plastic washer, and two small neodymium ring magnets with an outer diameter of 10mm, an inner diameter of 4mm, and a height of 5mm. If you want the same colors as the BNSF train, add two filament color changes at 2.80mm (Layer 24) and 4.80mm (Layer 42). Don't forget to add support enforcers in Prusa Slicer. You will need to add supports for the following parts: belly.stl, bnsf_train_body.stl, and roof.stl. You can use normal supports for counterbored holes on the belly part. For the train body, you will need two cylindrical support enforcers. Finally, for the roof, you need one box support enforcer. You can print this toy train with Prusament Galaxy Black PLA, Prusa Yellow PLA, Prusa Orange PLA, or Prusa Silver PLA.