TOY

cults3d

Made for my grandson Little truck nicknamed "Pitchoun" and it rolls. 110 mm high 125 mm wide Length 205 mm I've positioned the parts in such a way as to limit the maximum amount of support. Nevertheless, some parts will require scaffolding and adhesion to the platform, e.g. the chimneys. I designed this toy with Fusion 360 I printed it out to test the whole assembly, which consists of 32 parts. If you're interested, here are the Assembly Instructions. Hoping it will give you satisfaction If you have print burrs with your machine you will need to remove them. In Image file a maximum of information for the assembly. 1) Position the "Half Axles" on the "Rocker Panel". 2) Position the "Tray" by gluing it to the "Rocker panel", centering it correctly. 3) Position the "Cabin" by gluing it to the "Rocker panel". 4) Fit the "Mudguards" on the "Tray" and on the "Cabin" (Glue) 5) Centre the "Trailer hitch" on the rear "Rocker panel + Platform" (Glue) 6) Fit the "Shock absorber" onto the "Lower body" (Glue) 7) Engage the "Wheels" on the Axles 8) Screw on the "Nuts" holding the "Wheels" in place 9) Fit the "Nose" between the 2 eyes of the "Cab" (Glue) 10) Fit the 2 "Chimneys" onto the "Cabin", engaging them on the high "Cabin" supports (Glue)