Totoro Coat Rack: Revised

thingiverse

Update 11/6/2018: Right side STL saved without some of the edits: re-uploaded. Also added a picture. This is a remix of the Totoro Coat Rack by Yuyuy75. I made it more precise, added tolerances, screw head clearance, STLs for small format printers, etc. Here's a list of all of the modifications: 1. Fixed random dimensions. Hooks and holes are now spaced evenly, it's exactly 410mm long now, and it's 6mm thick (minus the hooks, which now have even dimensions, too). 2. Sliced the model such that the largest piece will fit on a 160x150mm bed. There's also an unsliced version. 3. Modified the hook geometry to make it stronger, look nicer, and print without supports. You may need supports if your printer can't do 60 degree overhangs. 4. Screw holes are now 5mm diameter with 9mm x 3mm head clearance hole. I included a model for a cap to cover the screw heads. 5. Made the dovetail joiners symmetric and the same dimensions (they were random before), and added 0.1mm clearance to them. For small format printers (bed 160mm x 150mm or larger), print: 1x sign 1x head 1x left_no_sign 1x middle_no_head 1x right 3x screw caps Then glue the sign and head on. For large format printers (bed 211mm x 150mm or larger), print: 1x left 1x middle 1x right 3x screw caps A modified step file is included if you wish to make further modifications.