Torture Tower (3D Printer Test) for .100 mm

thingiverse

Added V2 (upgraded footprint) on 12.6.2016 as shown in the attached photos. The wrong file was initially uploaded online. This test tower is a small prototype designed for testing various settings: Temperatures, Nozzle sizes, Retraction, Speed, and more for different filaments. You might not achieve perfect prints, but make sure to note down your best print settings, including Printer Model and settings used, and share them with the community ("I made this"). Please ensure that your slicing software is working correctly. If it's not rendering a proper printable model, try upgrading or switching to a different version. For any discussions related to test printing this tower, adhere strictly to these settings: Only use 0.100mm layer height Set Infill to 25% Do not use Support material No Raft is allowed No Brim is required Note: For PLA prints, cooling is necessary; PETG requires cooling as well, while ABS may need it too. Print Settings: Printer: Da Vinci 1.0 Pro Super Modified Rafts: No Supports: No Resolution: 0.100mm Infill: 25% Notes: For any discussions related to test printing this tower, please adhere strictly to these settings: Only use 0.100mm layer height Set Infill to 25% Do not use Support material No Raft is allowed No Brim is required Note: For PLA prints, cooling is necessary; PETG requires cooling as well, while ABS may need it too.