Toothy high heels

thingiverse

Designed a fresh pair of fun and unique platform shoes with an edgy twist. Inspired by a shark's deadly precision, these shoes feature straps and a platform that resemble its sharp teeth, while the heel takes on the menacing shape of a knife. Heel height: 12.7 cm (5 inches) towers above the rest Platform: 3.5 cm (1 3/8 inch) thick, adding to the shoe's overall height Size: 10.5 (US size), perfect for those who like to make a statement UPDATE (October 31, 2016): Version 2 is live! Changes made include: * #1 Shoes body_Ver2: Rectangular holes for connections with other parts are slightly bigger, allowing for easier assembly * #2 Top Heel.Ver2: Pegs connecting to the #1 shoes body are now slightly larger, ensuring a secure fit * #3 Front sole&teeth: The teeth part is thicker, measuring 2mm, to prevent breakage during printing * #4 Front Base_Ver2: Pegs connecting to the #1 shoes body are now slightly larger, guaranteeing stability * #5 Front strap.Ver2: The side closest to the toes has been shortened for a more precise fit Print Settings: Printer Brand: RepRap Printer: Geeetech Prusa i3 Rafts: Yes Supports: Yes Resolution: 0.2 mm Infill: At least 95% for stability and durability Notes: * #1 Shoes body.stl requires 100% infill for optimal stability, with support needed throughout the printing process * #2 Heel Handle.STL also demands 100% infill for stability, but no support is required * #3 Front sole&teeth.stl and #4 Front Base.stl require 100% infill for stability and support during printing * #5 Front strap Mouth.STL and #6 Ankle strap.2.STL are best printed with flexible material, such as PLA Post-Printing Instructions: To assemble the shoes, you will need: * 2 x parts #1-#5 (STL) * 4 x #6 (STL, Ankle strap) * 2 x 3.3mm diameter x 100mm length toggle bolts * 25mm wide, 5 meter long ribbon * Epoxy glue Thermo-forming method used on the heel requires boiling water and a mug similar in size to your heel. Print everything, then assemble #2 heel handle & top heel with a toggle bolt screwed from the bottom. Use thermo-forming to shape the vertical "knife blades" on the heel by dipping it in hot water for 5-10 seconds and pressing it into a curved shape using a small mug. Glue the heel assembly to the back of the #1 shoes body, then attach #3 Front sole&teeth to #4 Front Base. Finally, glue the front assembly onto the shoe body, securing the tabs of #5 Front strap Mouth into the front slots on the shoes body. Thread approximately 60cm long ribbon through the gap in the front platform and tie a knot at each end for a secure fit. Add ankle pieces and ribbon by threading them through Ankle strap holes, then tying a bow behind your ankle. ADDED NOTE (October 31, 2016): The uploaded files are designed for a right foot. Remember to mirror them for a perfect left foot!