Toothbrush Holder

prusaprinters

<p>For a while wanted to create a toothbrush holder for our bathroom and finally got around working on it. Wanted the holder to have space enough for a good amount of brushes.</p> <p>I also wanted some place to put the toothpaste tubes (the ones you store upright.</p> <p>Created slots/openings in the bottom so water doesn't sit in the holder for long. The structure in the middle is for giving it a bit more strength. The elliptical openings are for decoration, venting and to save some filament.</p> <p>I added the step and obj file version in case anybody wants to modify the design.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2 mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15%</p></div> <p><strong>Filament:</strong> eSun PLA+ Grey How I Designed This ===================</p> <p>I designed the holder with Fusion 360. Simply created a first sketch with 3 circles. One for the center compartment and 2 for the toothpaste holders.</p> <p>Then in the sketch I used some helper lines and circular patterns to define the center column elliptical shape.</p> <p>Then it was a matter of extruding the parts to the right height and rounding things of with fillets.</p> <p>Lastly I created the oval hole in the exterior and again used a circular pattern to create the other holes.</p> </p></p></p> Category: Bathroom