Tools Drawer - Under shelf mounting

prusaprinters

<p>This drawer houses tools and accessories for the Original Prusa Mini. The side runners mount to the underside of any convenient shelf/desk and allow the draw to slide open and downwards. Maximum access in minimum space.</p> <p>My prototype suffered from front corners lifting (PETg), you could spin it 180º so any problems are at the back and unseen.</p> <p>*NEW drawer V4, radiused back corners to clear runner screws.</p> <p>Pegs need to be glued into the drawer sides (flush to the inside).<br/> Note the rails have to be mounted accurately - need to be parallel and square - I held the rails to the draw and used double sided tape to get initial location correct, you can then carefully remove the drawer and screw the rails in place - note small counter sunk screws required to avoid interference when opening drawer .</p> <h3>Print instructions</h3><p>Designed to print on Prusa Mini<br/> Layer height - 0.25 draft<br/> Infil - 10%</p> <p>Prototype PETg drawer, PLA rails<br/> nothing too critical here - to small to get any serious weight in it :)</p>