Tool Rail for Prusa i3 MK3

prusaprinters

<p>A simple tool rail/rack for the Prusa i3 MK3. I wanted something minimal, with a small footprint, as well as something that would be a little more universal with the type of tool it accepted. It attaches to the right side of the YZ Frame, flush above the new black PSU.</p> <p>There should be barely enough clearance for concerns with the z-axis or extruder hitting the attachment during a print (see images) When I move the x-axis manually all the way to the right however, there will be interference with the extruder wire sleeve and zip ties. I rarely have prints that go to the edge of the build plate, and also the nozzle would technically be beyond the print area at that point. Rotating the zip ties ends on the sleeve will help avoid conflict with the rack.</p> <p>Changelog:<br/> v4 - original uploaded design.<br/> v6 - updated notch at the clipping point to get a tighter, more exact fit to the YZ Frame. Prevents any wiggle that was there previously.</p> <h3>Print instructions</h3><p>gcode for PETG, default 0.2 quality resolution. 15% infill. Print with the top side of the rack on the print bed. No supports needed.</p>