Tool Organizer

thingiverse

I used parameters for body parts: Layer Height 0.2 mm, Nozzle 0.5 mm, Wall Line Count 6, Infill 10%, Print Speed 40mm/s. Body parts consist of Organizer-01.stl, Organizer-02.stl, Organizer-03.stl - PETG (I used white because there was a lot of material). These very big parts do not require support (max part 300x155x72mm). BoxBig.stl is printed with PETG without support. BoxBig_CapLinesBase.stl is printed in dark/black PETG, a simple flat part. BoxBig_CapLines.stl is printed in yellow ABS, another simple flat part. Alternatively, if you don't have different colors, BoxBig_CapSimple_Alternative.stl can be used. This option allows for the creation of yellow and black stripes or a plain surface. Additional parts include BoxSmall.stl printed with PETG without support, BoxSmall_SimpleCap.stl in yellow ABS as another simple flat part. The Hand.stl is printed using ABS, requiring four M2x8mm bolts and nuts. Support should be used as shown in the photo to secure nut/bolt placements. Acetone and a tissue were used for post-processing. Hand_Probe.stl should be printed first to test parameters and dimensions for the nut. A total of 1,406 kg of white PETG was spent on body parts.