Tool Organiser for CNC Router

prusaprinters

I wanted to store my bits and collets for my cnc-router in a place that had easy access. So i designed this bit/collet holder to mount on the wall.There is place for:14x collet ER20100 x 1/8 inch bit = 3,175mm14x 4mm bit19x 6mm bit14x 8mm bit4x 10mm bitThe wood used is 5 mm plywood. Use a 1/8 inch straight end mill. All can be done with this bit.When making toolpaths make sure to cut all holes through on one, for the top plate and on the other one do a pocket for all holes of 2 mm. Except for the 4 corner holes they are mounting holes, this will be the bottom plate. Use M3 screws to mount top and bottom plate to the brackets.Print the left and right bracket, the third piece is a spacer for the bottom and top plate. It can be mounted to the wall in the middle this is to keep the space equal between them.