Tool Box Parametric - Prusa Mini Printable Remix

prusaprinters

<p>This is a remix of the <a href="https://www.prusaprinters.org/prints/39729-tool-box-parametric">Tool Box Parametric</a> by Yanev, scaled and modified to be printed on a Prusa Mini. The key changes are:</p><ul><li>Scaled down to fit on Prusa Mini printbed</li><li>All hardware mounts modified so that M3 sized bolts can still be used despite the scaling</li><li>1.75mm filament can still be used (if you want) for the box gasket</li></ul><p>6 M3 x 25 bolts are required for the hinges and latches. Increase the size to M3 x 28 if you'd like to add a nut to the end of each, but the holes are sized to let the bolts screw into the material and hold firmly without nuts.</p><p>A full set of internal dividers, as shown in the pictures, can be found <a href="https://www.printables.com/model/162660-tool-box-parametric-mini-dividers">here</a>.</p><p><strong>Print settings used in sample photos</strong><br>Prusament Mango Yellow and Galaxy Black PETG<br>100% rectilinear infill<br>0.15mm layer height<br>No supports</p><p>PLA, lower infill and higher layer heights should work fine too.</p><p>Hope this is useful for the Prusa Mini owners out there.</p>