Tonuino case

prusaprinters

<p>Implementation of the tonuino project: <a href="https://www.voss.earth/tonuino/">https://www.voss.earth/tonuino/</a></p> <p>Parts used:</p> <ul> <li>24mm arcade buttons</li> <li>poweradd slim 2 powerbank -&gt; broken open to access 5V USB (top plate needs quite some force to remove, is friction fit)</li> <li>50mm speaker</li> <li>standard "19,2 x 12,9 mm" switch for the 5V from the powerbank</li> <li>M3 Nuts and bolts (nut inserts)</li> </ul> <p><strong>Important</strong> since the original PCB didn't arrive in time a 70x30mm protoboard like this was used: <a href="https://www.amazon.it/Basetta-Millefori-Vetronite-piastra-Prototype/dp/B075W1H2TL?tag=thingiverse09-20">https://www.amazon.it/Basetta-Millefori-Vetronite-piastra-Prototype/dp/B075W1H2TL</a></p> <p>Also you may want to use a powerbank that is easier to misuse... I basically cut mine open</p> <p>After assembly a piece of felt was cut to size and attached via double sided tape, on the felt a stitched cross marks the RFID patch</p> <p>Update after a couple of months:</p> <ul> <li>Add hotsnot to the speaker and any other things that have mass (powerbank)</li> <li>use proper jumper wires with 1/10" molex style connectors, those chinese ones with round plug are too thin</li> <li>use proper wires in general</li> </ul> Category: Toys & Games