Tonuino case

thingiverse

Implementation of the tonuino project: https://www.voss.earth/tonuino/ Parts used: * 24mm arcade buttons * Poweradd slim 2 powerbank - broken open to access 5V USB (top plate requires considerable force to remove, is friction fit) * 50mm speaker * Standard "19.2 x 12.9 mm" switch for the 5V from the powerbank * M3 nuts and bolts (nut inserts) **Important**: Since the original PCB didn't arrive on time, a 70x30mm protoboard like this was used: https://www.amazon.it/Basetta-Millefori-Vetronite-piastra-Prototype/dp/B075W1H2TL You may also want to use a powerbank that is easier to misuse. I essentially dismantled mine. After assembly, a piece of felt was cut to size and attached via double-sided tape. On the felt, a stitched cross marks the RFID patch. Update after several months: * Add hot glue to the speaker and any other items with mass (powerbank) * Use proper jumper wires with 1/10" molex-style connectors - those Chinese ones with round plugs are too thin * Use proper wires in general