TonUINO 999 - Housing for the RFID Music Box TonUINO AiO

prusaprinters

This is a build of the TonUINO Project with the All-in-One PCB from Leiterkarten-Piraten. It's a Musicbox (not only) for Kids with a RFID reader. By holding a card on the top of the box, specific music will play. More information on the Project page…It's a cube with a side length of 9 cm → 9x9x9What you will need to build one:The TonUINO All-in-One PCB5x ButtonsRFID ReaderSpeaker (4 Ohm 3W 53mm)LiFePo-BatteryScrews M3x12 (4x) [ISO 7380]Screws M3x6 (4x) [ISO 4762 or ISO 7380]Threaded insert M3 (8x)Cables to connect the ButtonsMicro SD cardUSB-C cableCable ties for mounting the BatteryTools you need:Hex screw driversSoldering iron ( for Speaker & Buttons)Print Settings:0.4 mm nozzle0.2 mm layer heightInfill 30%3 bottom layers 2 top layers3 layer shell thicknessno supportsColors:Color 1: Housing & LidColor 2: ShellAny Color for RFID-ClampFor the Lid, print the first 3 layers in Color 2 !The Screw holes of the Lid are closed for better printing without support. They can be cutted easily. There are also imcluded support rings for the button holes, which are easy to remove after printing.For the lower Button on the right side you have to remove (unsolder / cut off) a part from the PCB: