TomTom Rider GPS mount and GoPro mount for it

prusaprinters

<p>The rotating base for the TomTom Rider mount is a bit thick so I made a part that replaces the rotation part with a slimmer piece that has holes for CNCKitchens heat-set thread inserts.</p><p>And also a piece that mates with the release-lever on the rider mount that fits the GoPro quick-release base.</p><p>The specific GPS mount I made this for is <a href="https://iconicparts.uk/shop/ols/products/multistrada-screen-brace-spacer-gps-mount-winglet-combo">https://iconicparts.uk/shop/ols/products/multistrada-screen-brace-spacer-gps-mount-winglet-combo</a> but really anything that can handle the screw-pattern will do (and you can download the Fusion360 designs and adjust things.</p><p>Instructions: remove the middle round place with 6 small Torx screws from the back of the Rider mount, replace with the tomtom_adapter model, I was afraid that the screws would not reach the threads so it might be a bit loose fit, add hot-glue if you feel like it.</p><p>To help with overhang issues in the middle the model has a thin (2 layers) part in the middle that needs to be cut out.</p><p>For the gopro plate mount place it on the lever and drill holes for M3 screws, I then made the holes a bit bigger and put in M3 heat-set thread inserts and screwed it in tight. Your M3 screws need to be pretty short, I only had M3x16 ones so I dremeled them down to approx 8-10mm length</p><p>To release the GPS you need to push the lever more straight back than down.</p><p>Printed in Colorfab NGen on Prusa MK3+MMU2S in single color mode so.</p><p>&nbsp;</p><p>Fusion 360 designs:&nbsp;</p><ul><li><a href="https://a360.co/3Es5bmM">https://a360.co/3Es5bmM</a> GoPro mount, includes the Rider mount too</li><li><a href="https://a360.co/3Es5cqQ">https://a360.co/3Es5cqQ</a> The rider mount</li></ul>