Tomahawk Air-K footrests

thingiverse

These are a pair of footrests for the Airk-375 and other kayaks in the Tomahawk Air-K range. They should be fitted to the sides of the kayak where it meets the floor. Place a strip of velcro on the bottom and the side of each footrest, and then place similar strips on the both the bottom and the side of the boat. Use longer strips on the boat so that you can adjust the position of the footrests. I used sticky backed velcro 4 inches wide cut to size. A more permanent solution for the velcro could use one of the many glues suitable for inflatable kayaks as the glue on the back of the velcro can lose adhesion when it gets too wet (although it recovers once it is dry). For print orientation, print with the footrest in its normal orientation i.e. with the long base on the print bed. Support is not required. The footrests are left and right handed. Position them with the stepped side facing towards you; that is the surface you put your foot on.