toilet roll stand with customizable height

thingiverse

This is a toilet roll holder with an adjustable height. Adjustable because the individual rods are available in various heights, ranging from 50 mm to 175 mm, incrementing by 25 mm increments, allowing you to choose your preferred total height after assembly. The individual parts can be higher. The toilet rolls rest on side arms, which have a maximum diameter of 34 mm and fit snugly into a connector (Picture 3). The rods connect via the compression of small cylinders with a lead-in chamfer for easy assembly. Vent holes in the rod facilitate the connection process. To add stability to the stand, you can fill the hollow base (200 mm diameter) with sand (Picture 4). This allows you to rotate the base until the sand fills the outer areas. Once filled, you can secure it with base closing chips. Required prints include: * 1 base * 3 base closing chips if you want to add weight * X rods * 1 lower connector part * 2 side arms * 1 upper connector part The recommended print orientation is shown in Picture 5. Happy printing! (No supports needed.)