Toilet Roll Holder

thingiverse

I wanted one badly, and I refused to go to IKEA because I despise IKEA, so I designed this thing myself. I invested way too much time in it, but hey, it works perfectly now! Parts List: * 2 x Part 1 * 2 x Part 2 * 2 x Part 3 * 2 x 5mm Screw (or 4mm, or maybe 6 - who knows?) * 1 x 50 mm M8 Threaded Rod Part 2 and 3 need a bit of support. Especially number three as it has 90-degree overhangs. The Way to Mount Them: 1. Get a nice shiny screw and stick it into the hole of part 1. Then screw it onto the wall, like really tight but not too tight because, you know, 3D printed parts can be fragile. 2. Get part 2 and stick it into part 1, then twist it to the left without using too much force because again, 3D printed parts are delicate. 3. Get the piece of 50mm (or something) M8 threaded rod and turn it into the two halves of part 3. If you have a M8 tap, use it; it will make things way easier. Or get a 7.5mm drill or something alike and just drill the holes out until the threaded end goes in easily. 4. Get a toilet roll, put part 3 through it, and slam that roll into the mounts - and you're done! The distance between the two mounts is 135mm. I already had to plug in the wall with this space between them so... that was just easier. You can easily choose another distance by threading a different length of threaded end (M8) into the two parts of the roll holder.