Toggly Fidget Bluey Yes/No Buttons

thingiverse

Summary ========= These emoji-inspired buttons work with the original [Super Toggly Fidget Button](https://www.thingiverse.com/thing:4906027) and are an extension of the [Super EMOTIVE Toggly Fidget Button](https://www.thingiverse.com/thing:4932864). They are created from an inspiration in the kid's show Bluey. Note that the Bluey and Bingo toys are not included. They are shown for inspiration only. All following instructions are right from the Super EMOTIVE Toggly Fidget Button Printing ========= To improve printability, each button has been split into two parts - both of which can be positioned to print with zero supports. For a smoother surface, 0.1mm layer heights are recommended, but 0.2mm layer heights will work. Assembly ========= The two parts of each button fit together with a dovetail joint. The clearances for this fit are very tight and the results will vary from printer-to-printer, filament-to-filament, and settings-to-settings. If the parts don't slide together easily, try sanding the dovetail down - especially the sharp edges on both parts It's okay if the parts are a little loose - they'll be held together within the case. If the movement bothers you, though, a little glue will fix that.