Tobacco Case

thingiverse

A tobacco case with separate compartments for tobacco, papers and filter tips. 3 pairs of 4x4mm cylindrical magnets are needed. Holes are dimensioned for snap on usage. But beware of the polarities. https://www.youtube.com/shorts/-XAPGgSMBu0 Onshape link: https://cad.onshape.com/documents/ed365844df4fa1a92efd3380/w/1ea063e650f09262f8ca7652/e/974a9228d4ced77c56c26195?renderMode=0&uiState=633167020198cd58a38fae36 Three parts are printed in place with the help of the support part. * Open TCase-Body and TCase-Support in Cura. * Select TCase-Support and click *Print As Support* from the left side menu * In the same menu, click *Select Settings* and disable *Drop Down Support Mesh* * Select both models, right click and click *Merge Models* * From the profile settings on the right side, do the following changes: Support Type - Lines Support Interface - Disabled Support X/Y Distance - 0.4 Support Top Distance - 0.2 Support Bottom Distance - 0.2 Since the tips drawer is printed on top of the body, distance between two parts is important. Depending on the filament used 0.2mm(TCase-Body-02) or 0.4mm(TCase-Body-04) should be used. I recommend starting with 0.4. TCase-Lid is an ordinary part. Print it without support.