TMNT Raphael 1988 Articulated Print-in-Place

prusaprinters

<p>TMNT Raphael 1988 Articulated Print-in-Place</p><p>High: 12 cm</p><p>Join us in Patreon</p><p><a href="https://www.patreon.com/la_calavera_3dprint">https://www.patreon.com/la_calavera_3dprint</a></p><p>and get...</p><p>-Permission to sell physical 3D printed toys of our designs.</p><p>-4 new models each month.</p><p>-4 figures from the back catalogue each month at your choice</p><p>-Exclusive weapons and accessories.</p><p>-Scenery for dioramas.</p><p>-Exclusive interchangeable heads and expressions for toys.</p><p>Print your own articulated action figure in pla filament and resin</p><p>&nbsp;</p><p>-Print in a glass bed using any hold hair spray (this is optional, but we've been printing this way for years, nothing give you better looking and flat first layers)</p><p>FAQ</p><p>1-the print keep failing, the arms don't stick to the pre-support pillar and fall of and ruin the print.</p><p>Solution: Between the arms and the pre-support pillars you will see an empty space (one layer) is there for a reason, this allow you to remove the pre-support pillar easily, without this the pre-support pillar will weld totally to the arm, if while you are printing the file the arms do not stick to the pre-support pillar and fall off, you must increase the nozzle temp by 5 grades and test again</p><p>you see, the filament won't be sticky enough until you melt it with the right temperature, for us, this is 215, but this can vary from printer to printer and filament brands, it could be 220 or even 225 for you.</p><p>&nbsp;</p><p>3D PRINTING SETTINGS</p><p>Primary Layer Height = 0,1600 (mm) (mandatory)</p><p>Top Solid Layers= 9</p><p>Outline/Perimeter Shells= 2</p><p>Temperature= 215°C</p><p>Default Printing Speed= 40,0 mm/s</p><p>Outline Underspeed= 40%</p><p>Infill Percentage= 12% (or more, it's up to you)</p>