TMC Heat sink alignment

thingiverse

This tool is designed to perfectly align the heat sink with the stepper driver, creating a neat and organized setup. The BTT TMC2209 v1.2 is featured, showcasing its sleek design. Notice that the 3 vertical pins intended for legacy boards requiring jumpers for SPI connection have been removed since they're not needed due to the use of a SKR board with built-in jumpers. The included files, STP_Alignment_1-8 and STP_Alignment_2, provide adjustable gaps for the stepper pins - 1.8mm and 2mm respectively. To purchase this tool, visit the following link: https://www.aliexpress.com/item/32946733067.html?spm=2114.12010615.8148356.5.73f4d67eRxxp8O The design files are provided for customization; feel free to use them as you see fit. Printing took less than 30 minutes, and the total print time was around 30 minutes. Here's a step-by-step guide: 1. Carefully place the stepper driver into the tool. 2. Due to the heat sink being slightly thinner than the guide tool, apply even layers of sticky tape on both sides for precise alignment. Spend some time ensuring it fits perfectly during dry fitting. 3. Remove the heat sink's adhesion protector and apply gentle pressure for 60 seconds. 4. The setup is now complete!