
TL-Smoother Case with 45 degree mounting (for delta or Kossel printers) with STEP files
prusaprinters
<p>I needed a TL-smoother case to fit the BIGTREETECH type of TL-Smoothers with a 25x25x10mm heat sink. I found some really cool cases here but the one I wanted to use had "no derivatives" licensing so I asked the creator if they would allow a remix, but then got impatient and decided to just roll my own. Once I started designing this case, I found that I wanted a few more things like a 45 degree mounting and optimization for a heat sink. This is the result, and I have printed it successfully in ABS (I scale by 102% for ABS and it fit pretty well).</p> <p>There are 2 versions, one with "mouse ears" for better bed adhesion and one without. I also uploaded the step files for easy remixology.</p> <p>I used the following in designing this:</p> <p>Customizable Standoff Generator<br/> by snemetz Apr 29, 2016</p> <p><a href="https://www.thingiverse.com/thing:1528494">https://www.thingiverse.com/thing:1528494</a></p> <p>TL-Smoother (Makerbase) Placeholder<br/> by JMDesigns Feb 10, 2018</p> <p><a href="https://www.thingiverse.com/thing:2789501">https://www.thingiverse.com/thing:2789501</a></p> <p>And I took some inspiration from this, which at the time did not have licensing terms friendly to remixing (since updated to allow remixing).</p> <p><a href="https://www.thingiverse.com/thing:2943018">https://www.thingiverse.com/thing:2943018</a></p> <p>I printed both parts in a top up orientation so the supports will not show on the finished surface.</p> <p>To assemble this, some M4 screws and t-nuts for mounting, and six M3 x 12mm screws and nuts for securing the cover were necessary.</p> <p>These are similar to the heat sinks I am using, which are attached using thermal glue:<br/> https://www.amazon.com/Easycargo-Heatsink-Anodized-25x25x10mm-25mmx25mmx10mm/dp/B07B642856</p> <p>I mounted it inside the base frame of my Anycubic Linear Plus, though I have moved the motherboard outside the base so I am not sure if there is clearance using the stock motherboard.</p> Category: 3D Printer Parts
With this file you will be able to print TL-Smoother Case with 45 degree mounting (for delta or Kossel printers) with STEP files with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on TL-Smoother Case with 45 degree mounting (for delta or Kossel printers) with STEP files.