TJIRC MiniQ FPV parts

thingiverse

TJIRC MINIQ parts for DJI HD FPV. These were designed/ toleranced for printing in ABS. The servo mounts need m1.5/m2 nuts melting into the underside of them, I did this with a bolt through the hole, then fitted a nut and heated with a lighter, then pull the nut into the hole and let it cool. Camera mount is for the standard DJI camera, I drilled the camera mount by the neck of the camera lens and used a grub screw through the mount to grip onto the narrow part of the lens which will hold the camera in place . Use small screws through the side of the fuselage to hold the caddix vtx tray in place. Bond the factory motor mount in, then bolt the motor on with bolts going through the original mount, through the 3d printed mount and into the motor. Any questions, please ask!