Tiva C series Launchpad Clamshell REV. 1.0
prusaprinters
This case is for a Texas Instruments Tiva C series Launchpad, and was modeled off of the EK-TM4C123GXL. Print Settings Printer: Flux Delta Rafts: No Supports: No Resolution: .25 Infill: 5% Notes: I used such a low resolution with a low infill due to printing it in a translucent PLA, in order to see the board inside. The pin (button pass-through) needs to be printed 3 times along with 3 pin caps. Post-Printing ============= Clam shell Due to the printable hinge, the base walls need to be gently spread in order to get the top half to mate with the bottom half. Pin Assembly For the assembly of the pins, I've been placing the pin up through the holes in the upper half of the clamshell and super gluing the pin caps on top. Category: Hobby
With this file you will be able to print Tiva C series Launchpad Clamshell REV. 1.0 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tiva C series Launchpad Clamshell REV. 1.0.