Titan Aqua Mount Ender 3 w/BL Touch Mount

thingiverse

YouTube video related to this mount at: https://youtu.be/Mbm6egKoNLg. Starts around the 33 minute mark. I created this mount to affix a Titan Aqua water cooled hotend to an Ender 3 carriage. Print with four walls in order to have enough strength to screw the Titan to the mount with self-tapping screws for plastics. The bottom v-wheel screw may need to be trimmed for clearance purposes. I found a new screw of the correct length for this location. Also, this design centers the nozzle in the carriage and you will either need to adjust the x-endstop hardware or adjust the xmin in firmware. Otherwise the x=0 location will be off of the left side of the bed. I adjusted the firmware to account for this in my implementation. Using the TH3D Unified Firmware for the SKR Mini E3 I changed the following three lines in the configuration.h file: \#define HOME_ADJUST \#define X_HOME_LOCATION -28 \#define Y_HOME_LOCATION -0 For the BLTouch offset you should be able to use: \#define NOZZLE_TO_PROBE_OFFSET { 49, 0, 0 } Also, just for reference the new esteps for the Titan Aqua: \#define CUSTOM_ESTEPS_VALUE 837