Titan Aero mount for KP3S

prusaprinters

<p>No additional hardware required, but you will need to splice the wires to the original part cooling fan if you also want to upgrade to a 40mm clear fan for the Aero heatsink. I did this instead of routing a new wire to the mainboard because I'm lazy. I designed this to be aligned with the X axis limit switch to maximize print volume too!</p><p>Check pictures for print orientation. No supports needed. I printed at 0.5mm layer height because I have a 0.8mm nozzle, at these settings the print time is 37min. Part cooling fan was optimized to point right under the nozzle. &nbsp;The stock 5015 blower fan fits in the mount without hardware, just friction fit. You can add a dab of hot glue to secure it but I didn't find that necessary.</p><p>Here is the link to the Titan Aero clone I used:</p><p><a href="https://www.aliexpress.com/item/4000008905489.html?spm=a2g0o.9042311.0.0.27424c4duo7ZB0">https://www.aliexpress.com/item/4000008905489.html?spm=a2g0o.9042311.0.0.27424c4duo7ZB0</a></p><p>There are a few other options for clones on Aliexpress but be careful because there seem to be two versions of clones floating around, of which only one will fit our Titan extruders, and I can only vouch for the one I ordered.</p><p>and the blue led 40mm fan:</p><p><a href="https://www.aliexpress.com/item/4000571498602.html?spm=a2g0o.9042311.0.0.27424c4duo7ZB0">https://www.aliexpress.com/item/4000571498602.html?spm=a2g0o.9042311.0.0.27424c4duo7ZB0</a></p>