Tip-out Trays (two sizes)

thingiverse

Tip out tray for hinged sink door storage: 6/15/15: Larger version added Small version is: 7 inches wide, 2 inches from the door, and 2.75 inches high Large version is: 8.75 inches wide, 2 inches from the door, and 3.25 inches high If you want a tip-out tray and have plastic to spare, these are great ones. Most tip-out sink doors will support two of these side by side. I'm thinking instead of using four screws, I'll superglue the joining sides and glue a plastic bar across the bottom, which effectively makes it one piece with a divider in the middle. Plus only need two screws this way NOTE: This design comes from a solid block, from which material is removed Also note that the large version still shows holes in the back; left the pattern but closed the holes so moisture won't get on the mounted surface. The large tray didn't update, so I made a V2 with no holes in the back. Left the other one just in case someone prefers the holes Instructions My first print was ABS, but it pulled up from glass some, maybe the print bed wasn't hot enough, but I'll try PLA on the next one The larger tray pushes the limits of the Flashforge Creator; printed the first couple layers and it will do fine.