TinyTrainer Gloves with Bar Bumpers

thingiverse

I edited my original TinyTrainer TPU gloves with built-in zip ties to link between their ends to work as TPU bumper bars. There are 4 variants here, the bolt head holes are spaced for 12mm mount motors, versions for 9mm can be done if requested: 3 inch frame, 2mm thick, single bar 3 inch frame, 3mm thick, single bar 3 inch frame, 2mm thick, surrounding bars on all sides 3 inch frame, 4mm thick, surrounding bars on all sides Direct downloads from my website: http://www.haku.co.uk/3D/TinyTrainer_Glove_Bar_3in_2mm.stl http://www.haku.co.uk/3D/TinyTrainer_Glove_Bar_3in_3mm.stl http://www.haku.co.uk/3D/TinyTrainer_Glove_Surround_3in_2mm.stl http://www.haku.co.uk/3D/TinyTrainer_Glove_Surround_3in_3mm.stl 4 inch frame version? Yes, but I need two simple single accurate measurements from it to make them for you. Please post in the Comments if you have a 4" frame (even a fully built craft), digital calipers and want versions for it. TPU print settings: 0.2mm layer height 4 perimeters (to make the bars solid) Support everywhere Installing instructions: Note that I made the bars all purposely 2mm shorter than being perfect length, this is to make sure they are held taut when installed, which makes them a little trickier to stretch and install than the non-bar gloves, see the 3rd photo on how I install/remove the last glove. Also it might help to read what I wrote in the original arm guards Summary about putting the ordinary gloves on: https://www.thingiverse.com/thing:4690939 You can sell prints of this, but don't overcharge, and link back here. Tips are most welcome https://www.paypal.com/paypalme/Haku3D and will encourage me to make more designs for everyone to benefit. P.S. Yes those props are TPU, yes they work, here's the original set on my other TinyTrainer: https://youtu.be/jcLGBiPoMzs Most FPV people may know me as licensetodrive on YouTube https://www.youtube.com/user/licensetodrive