TinyPrintHead for Easythreed K7 X1 etc

thingiverse

This is a tiny direct drive printhead with mk8/cr10 heatsink (stock for ender family and clones) with any compatible hotend (like mk8/v5/v6/volcano/bp6 blocks and proper heatbreak), modded prusa mk3s trihorn duct for 5015 blower and K3D Minifeeder (https://k3d.tech/minifeeder/). To assemble this mount you need 10 hot melt M3 inserts (~d=3.6-4mm h=3mm), several M3 screws and a 20+cm piece of PTFE OD4mm/ID2mm tube Feeder: dual drive full gears kit - https://aliexpress.com/item/1005003334389217.html nema14 20mm motor (almost any, the cheapest like this one https://aliexpress.com/item/1005004341872432.html is ok) 5 M3 screws and one M3 hot melt insert All stl's should be printed without supports at default orientation. heat resistant plastic (abs/pa/pp/pc or same with gf/cf) required for fan mounts and abs or composite for feeder ive used PA12CF30 to print this head and ABS for feeder