Tiny keychain pill container

prusaprinters

<h3><strong>Description</strong></h3><p>This is a tiny keychain pill canister for bringing a couple small pills with you. Most 3D printable pill bottles I've found are quite large - this one is tiny and intended for a couple of very small pills. The internal cylinder is 8mm diameter and 8mm tall.</p><h3><strong>Print Settings</strong></h3><p>The assembly in the pictures was printed at the following settings:</p><ul><li>Printer: Prusa i3 MK3S+</li><li>Print Settings<ul><li>0.25mm nozzle</li><li>0.07mm layer height</li><li>100% infill</li><li>75% speed</li></ul></li><li>Filament: Prusament Prusa Orange PETG</li><li>Supports: Yes (for the lid just beneath the knurled ring)</li><li>Brim: none</li></ul><h3><strong>Print Instructions</strong></h3><ol><li><strong>NOTE:</strong> All STL's are in millimeters.</li><li>Paint on some supports on the lid just beneath the knurled ring otherwise your printer will try to print in air.</li><li>Print the whole thing at 75% speed as it's quite small and needs time to cool.</li></ol><h3><strong>Assembly Instructions</strong></h3><ol><li>Carefully remove the lid from the supports, cleaning up any leftover support material.</li><li>Gently test out threading the lid into the body. If the threads are too tight, squeak, or otherwise seize up, print the lid at 99% scale.</li><li>Add a small split-ring through the hole in the lug.</li><li>Enjoy not forgetting your meds at home while out and about town!</li></ol>