Tiny Fidget Toy (bistable)
prusaprinters
<p>Hi,</p><p> </p><p>this toy is tiny (19 x 32 x 3 (3.5) mm) and has a 3.5 mm hole on one side so that you can add it to your keychain. </p><p>The switch in the middle has two positions, when you push the switch in upwards it snaps into its new position. If you push the switch back down it snaps into its original position.</p><p><br><strong>Please note:</strong> Although this is a fidget toy, it can be brittle depending on your print settings and material used. I recommend to actuate it once (very carefully) after printing while the fidget toy is still warm. I made a few of these, one broke after 7 times but my current one lasted over two weeks so far.</p><p> </p><p>I hope you like it :-)</p><p> </p><p><strong>How do you print it?</strong></p><p>It consists of only one part and can easily be printed in around 20 minutes with no supports. I recommend a 0.12 mm layer height, a 20% gyroid infill and PLA. </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p>If it does not work for you please leave a comment or shoot me a message instead of just posting a 1 star review, I'm sure there is no problem that can't be solved.</p><p><br> </p>
With this file you will be able to print Tiny Fidget Toy (bistable) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tiny Fidget Toy (bistable).