Tiny Dragon filament clip

prusaprinters

<p>This is a simple remix of zxsix's remix (<a href="https://www.thingiverse.com/thing:4585786">https://www.thingiverse.com/thing:4585786</a>) of Lyl3's Universal Dual Filament Dragon Clip (<a href="https://www.thingiverse.com/thing:3757356">https://www.thingiverse.com/thing:3757356</a>) with inspiration from intofocus filament clip (<a href="https://www.thingiverse.com/thing:282242">https://www.thingiverse.com/thing:282242</a>).</p> <p>I had problems storing all my spools because the filament clip often snagged on another spool and came loose. So I wanted a solution where the clip was inside the spool. I also got a bit tired of putting my filament clip on the table and then not finding it again so I also wanted something that would automatically be on hand.</p> <p>I liked intofocus' idea of having the clip threaded onto the filament but I found the clipping side lacking. Lyl3's dragon clip on the other hand has always clipped on beautifully so I decided to merge the ideas with the minor adjustment that I used zxsix's version that does not feature 2,85mm.</p> <p>I have used this system for some weeks and it has so far been working beautifully. It requires a bit of a knack to clip into place but once there it has been keeping the spools tidy very well. It might not work very well with filament that has severe kinks.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2m</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Filament:</strong> Prusament PETG</p> </p></p></p> Category: 3D Printer Accessories