Tina2 Led bars

cults3d

I designed these supports to be able to insert 12v led strips inside them. The supports are perfectly integrated into the front uprights of the Tina2 structure and will allow you to illuminate the inside of the printer and see the progress of the print without resorting to a torch. Thanks to these supports, the power pins of the LED strips will be protected and therefore a possible short circuit on the 12v line of the printer will not be caused. The led strips can be connected directly to the 12v line which feeds the printer fan and therefore the leds will turn on automatically when the temperature of the nozzle is higher than 50° and they will turn off when the temperature drops below this threshold. Simple double-sided tape can be used to attach the LED bars to the printer uprights. The bars are designed to be printed directly with the Tina2 printer and therefore are divided into two parts, one 10cm and one 7cm which will need to be glued together to have 17cm high bars. The right led bar is different from the left led bar because the printer uprights are different. I uploaded two versions of the bars, one with the front and back separated (they will have to be glued together) and a version already joined, in which only the leds will have to be inserted inside.