Timelapse Clock Holder for Prusa I3 MK3S

thingiverse

This is a Customized Timelapse Clock Holder for Prusa I3 MK3S. It securely attaches to the X axis. The button design is credited to Stebo : https://www.thingiverse.com/thing:1570116 # Print Settings 1 x TimelapseClockHolder1 : Layer thickness set at 0.20mm, Raft disabled, Support enabled, Infill density at 100% 1 x TimelapseClockHolder2 : Layer thickness set at 0.20mm, Raft disabled, Support disabled, Infill density at 100% 1 x TimelapseClockHolderButton : Layer thickness set at 0.20mm, Raft disabled, Support disabled, Infill density at 20% 1 x TimelapseClockHolderButtonCap : Layer thickness set at 0.20mm, Raft disabled, Support disabled, Infill density at 100% # Accessories 1 x M6x45mm Hex Head screw 1 x M6 jam nut 2 x M4x8mm SHCS screws 1 x M2x12mm SHCS screw 1 x M2 jam nut The clock must have a diameter of 90mm and a depth of 20-40mm. # Mounting Instructions Mount the clock into TimelapseClockHolder2 using an M2x12mm SHCS screw and an M2 jam nut. Secure TimelapseClockHolder1 to the X axis with two M4x8mm SHCS screws; threaded holes are already present on the X end idler, so no extra force is required. Insert the M6 screw into TimelapseClockHolderButton. Place TimelapseClockHolderButtonCap onto TimelapseClockHolderButton. Slide TimelapseClockHolder2 over TimelapseClockHolder1 and secure them together with TimelapseClockHolderButton and an M6 jam nut.