TiltBridge Case - D32 Pro /w TFT

thingiverse

# TiltBridge Case for the D32 Pro /w TFT This exceptional case was specifically designed for the TiltBridge Tilt Hydrometer-to-WiFi project. It is engineered to work seamlessly with the LOLIN D32 Pro and corresponding TFT screen, as well as the necessary cable. The brilliant design of this case was conceived by @gromitdj on the HomeBrewTalk forums. Link to TiltBridge project: http://www.tiltbridge.com/ **Note**: Two versions of the case are available, depending on the version of the TFT screen you have. Print v100 files for v1.0.0 of the TFT screen and v110 files for v1.1.0 of the TFT screen. ## Parts List In addition to printing the case, you will need the following components to complete your TiltBridge build: - LOLIN D32 Pro: https://www.aliexpress.com/item/32883116057.html - LOLIN TFT Screen: https://www.aliexpress.com/item/32919729730.html - LOLIN TFT cable: https://www.aliexpress.com/item/32848833474.html - 2x M2 x 5mm countersunk screws - 3x M2 x 5mm pan head screws ## Assembly Instructions Assembling your TiltBridge case is a straightforward process that can be completed in under two minutes. After gathering the necessary parts and printing the case, follow these steps: 1. Connect the TFT screen to the D32 pro using the TFT cable. 2. Insert the D32 Pro into the case with the USB port facing through the hole on the side of the case and secure it with 3x pan screws. 3. Place the TFT screen into the case, ensuring that the 3D printed "pins" go through the holes in the screen. 4. Place the lid over the base assembly. 5. Secure the lid to the base using countersunk screws inserted through the holes on either side of the case.