Tilt-Shift Adapter for Canon EF and FD lenses for EOS-M

pinshape

Here is a Tilt-Shift Adapter that can be configured to attach Canon EF or FD lenses to an EOS-M camera. Old FD lenses will allow the selection of the f-stop. EF lenses will have a wide open aperture and the adapter allows for detailed control of depth of field for miniature style photography, which has always been wanted, and also curiosity was piqued about whether one can print in the required precision and create a functional adapter. Shift and tilt can be set between plus/minus 10mm and 10 degree, respectively. It is used with the EF 24 mm L 1,4 II or FD 24 2.8, FD85mm 1.8, or FD 135mm F2 lenses. An integrated lock for EF lenses uses a spring from a pen and the adapter will also lock on the EOS-M. The rotation stop is tightened to mount or remove the adapter. To mount an FD lens first insert the lens with the red marker at a 45-degree angle to the right of the marker on the adapter, then turn left until the red marker lines up with the marker on the adapter, press the lens down and turn right until the lens locks. This will engage the aperture lever. Even older Breech lock FD lenses will also fit. Those can be set to manual aperture operation directly by pushing the lever counter-clockwise before mounting on the adapter. There is not much space in 26 mm for the mechanics so it was printed in Cabonfiber PETG at a 0.1 mm resolution and a 0.4 mm nozzle for strength and precision. Parts for the EF or FD version are labeled accordingly, the rest are shared parts. The three FD parts need to be glued together. Tolerances are very tight to ensure a good light seal and the surfaces need to be wet sanded with a sanding sponge and 220-400 grid until everything glides smoothly together. If enough friction is left, you can remove the screw for the shift adjustment and have a quick adjustable adapter for hand-held operation. Required screws are: 1x Hex head M4 40mm 3x Internal hex M3 50mm 2x Internal hex M3 40mm 1x Internal hex M3 30mm 3x Internal hex M3 20mm 1x Internal hex M2 8mm 3x M3 nuts 1x M4 nut 1/2 spring from a pen Carbonfiber PETG, 0.1mm resolution, 0.4mm nozzles, 3 outer layers, 50% infill