Tile Mate Case (Fits Current Models 2018 and Forward) Anti-Pocker Presser

prusaprinters

<p>I love my Tile Mate Bluetooth tracker, but it has a serious design flaw. When I place it on my keyring and put my keys in my pocket, it goes off by accident all the time. I ran the batteries down after six months because of accidental button-presses, and the Mate is supposed to last a whole year.</p> <p>So I made this protective case that reduces the chance of keys and other things pushing up against the button in your pocket. So far it has worked great!</p> <p>It also helps protect your Tile and does not reduce the range.</p> <p>This one fits current Tile Mate models with the replaceable batteries. (2018 and onward.) if your tile measures 35mm x 35mm x 6.25mm, this is the one you want.</p> <p>Use the Cura feature "Horizontal Expansion" to get your parts to fit snugly. I set mine to -0.11. It may take you a couple of tries to get the tension right. It should snap together tightly but not so tight that you can't open it when you need to change the battery.</p> <p>Make sure the keychain hole is aligned correctly and simply snap together.</p> <p>If your pieces won't fit together, you need to calibrate your printer or use "Horizontal expansion" or "print exterior first".</p>