Tighterneko (60% Keyboard Case)

prusaprinters

<p>This model is a zero tolerance remix of the popular Bakeneko 60% keyboard (<a href="https://github.com/kkatano/bakeneko-60">https://github.com/kkatano/bakeneko-60</a>) by kkatano.</p><p>Please use this link to see the “official” documentation if you have any questions about the board!</p><p>As you need glue to keep the Bakeneko parts together on a high quality printer (actually printing with a 0.1mm tolerance) I modified the models and exported them with zero tolerance.</p><p>With the tighter fit you don't have to use glue anymore.</p><p>Additionally I added the base Bakeneko 3d printable model as the main repository only includes the splitted model to be printed with PLA, yet not the non-splitted model which would probably fit on a lot of printbeds without the need to print it in separate pieces.</p><h3>Note</h3><p>If push-to-fit does not work on your printed parts (e.g. parts are too big to be pushed into each other), print calibration cubes first - your printer might not be able to print with “zero tolerance”.</p><h3>Print instructions</h3><ul><li>Print calibration cubes first to make sure your printer can print zero-tolerance models</li><li>Infill: Grid with 15-20%</li><li>Supports: None</li><li>Material: PLA (should work with all others too)</li></ul><h3>Special thanks</h3><p>To Erland for suggesting that name ;-)</p>