Tic-Tac-Toilet Paper Shelf

cults3d

A modular toilet paper shelf designed to be printable on the relatively small build surface of the Ender 3 Pro. In order to print the shelf as shown in the image, you will need to print the following parts: 4x Shelf Joints 4x Internal Shelves 8x External Shelves 3x Bottom Row Brackets 3x X Shapes (For faster printing, you can print the vertical shelf parts (2x Internal, 4x External) and the X Shapes in Vase Mode (Spiralize Outer Contour setting in Cura) as those parts are not strictly structural.) The Bottom Shelf Bracket part is designed to hold either a roll of toilet paper on the down, or an X Shape that has been printed in Vase Mode by sliding it's corners into the appropriate slots on the bracket. Please do this carefully, as it is a tight fit and Vase Mode objects are quire fragile. The bracket then hangs from the back of the shelf above it, as in the picture. The Joint part has an indention in one end that is designed to hook on to a screw head protruding from the wall. It should hook in any of the four directions for ease of assembly. I highly suggest printing the parts with the indention facing up. I suggest printing all of the Internal and External Shelf parts standing up, so that no supports would be needed. If you are printing multiple in one go, you may want to use a raft to prevent tipping, but that shouldn't be 100% necessary. UPDATE: Added a new X model for printing the X solid with a slot in the model for the bottom row dowel. Also added a new bracket/dowel specifically for this style of X. So if you want to be able to easily move the X between different positions, print the Solid X variant and it's Bracket. Otherwise, use the faster-to-print VaseMode X and Bracket variants.