TIC TAC TOE (6x3mm holes and logo)

thingiverse

I prefer the original model of Tic Tac Toe designed by Orken, available on Thingiverse. However, I only had 6x3 mm magnets at my disposal. To accommodate this, I modified the holes and adjusted the height of the middle cell to match the other cells, which were 0.1 mm taller. I also added XO markings on top of the box. These marks have no connection to "hugs and kisses." The model was printed with my favorite orange color as well as additional colors. For consistency, I included the jeton (or Xs and Os) design from the original model found at [https://www.thingiverse.com/thing:2909705](https://www.thingiverse.com/thing:2909705). Please note that the height of the jeton is 6 mm, the body of the box is 5.1 mm high, and the hole for the jeton is 3.1 mm deep. To ensure a perfect fit, it's essential to leave a 0.1 mm tolerance during printing. My printing settings were as follows: Body: 0.2 mm layer thickness from 0 to 5 mm, and 0.1 mm layer thickness from 5 mm to the top layer (5.1 mm). Jeton: 0.2 mm layer thickness with a color change occurring at 3.0 mm.