Thundertank

cults3d

English: A model inspired in the mithical thundertank, from the tv series not the toy model. Its original size is 28 cm long (11.4 in) was designed in order to be acurate with some modifications in order to be printed. The rear cabain has 3 chairs, walls and a canion weapon which is fully jointed and can twist around its axis. The front cabin has two chairs, levers and console detailed (levers and console are independent to be printed on detail) It has a cabin cover that can be removed. Caterpilar chains are single piece but was adjusted. Cilinders, shafts and supports are independent pieces. The jaw is jointed. Arms are jointed and can be moved apart from canion arms. The thundercats logo is suposed to be in two parts, but I did it in one piece so it be allways complete, and nice. Cylindrical parts has special design so it can be printed vertically and use an inner reinforce so the mechanical resistance coul be increased. the whole tank was printed in PLA with 0.4mm noozle, I need more practice printing some parts, but all model was printed and tested, the one on pictures was assembled with glue and tape so I could disasembled later and painted it. Assemble instructions comes in a pdf file. English: Tank inspired by the mythical television series of the thundercats, from the tv series not from the toy. Its original size is 28 cm long (11.4 inches) was designed with precision with some modifications to be able to be printed. The rear cockpit has three chairs, walls and a cannon that is fully articulated and can rotate around one of its axes. The front cockpit has two chairs, levers and detailed dashboard (the levers are independent so they can be printed). It has a front cab cover that can be removed. The track chains are one-piece but tight-fitting. The rollers, axles and support are independent. The jaw is articulated. The arms are articulated and move independently of the arm barrels. The thundercats logo is supposed to be in two pieces, but I designed it to be printed in one piece so it's always complete and cool. The cylinder pieces are designed to be printed vertically and then introduce reinforcement so that the mechanical strength is increased. The entire tank was printed in PLA with 0.4mm nozzle, I need more practice to print some parts, although the entire model was printed and tested. The one shown in the pictures was assembled with glue and tape so I could take it apart later and paint it. The instructions are in a pdf file. UPDATE: I ADDED THE VERSION OF THE CHAINED CATERPILLARS, INSTRUCTIONS AND PARTS ARE ADDED FOR FREE FOR THOSE WHO HAS BOUGHT THE MODEL. UPDATE: I ADDED THE VERSION OF THE WHEELS WITH BRAKE SHOES, SINSTRUCTIONS AND PARTS HAVE BEEN ADDED FOR FREE FOR THOSE WHO BOUGHT THE MODEL.