Thrustmaster TH8A Shifter Rig Mount

thingiverse

I required a mount for my TH8A shifter, to secure it to my 8020/aluminium extrusion based rig. The TH8As clamp mount wouldn't fit on my shifter support because it was made of 80mm wide extrusion, so I designed a mount that's strong enough to handle the push/pull of the shifter being used but doesn't move the shifter too far away from the user. In addition to the printed part, you will need: 4 x M8 bolts 20mm long A few suitably sized washers, if required (to prevent you from bottoming out the bolts in your extrusion) 4 x T nuts 4 x M6 16mm long bolts for mounting the shifter itself. This model is designed with holes that are interference fit, so if your printer undersizes holes within models, adjust your horizontal expansion multiplier to suit or scale the model slightly larger (I used 102% on the X and Y axis) successfully. Incidentally, I use a Motedis S-Dream rig but this will work with any similar aluminium extrusion rigs.