Thrustmaster T16000M FCS HOTAS Table Mount

thingiverse

I didn't want the Joystick and Throttle cluttering up my Desk space, so I created a simple yet sturdy mounting system for my HOTAS to attach to my table. It's incredibly easy to remove these mounts and set them aside. For dimensions used, please refer to the accompanying images. The Thrustmaster Throttle and Joystick both have mounting points, requiring 4 x M6 screws for attachment. I also added a cable clip to connect the throttle's cable with the one from the pedals if you're using them. For printing, you'll need a 200x200mm print bed. +++++ Updates +++++ 05/25/2018 I added a grip piece to mount on the M8 screw head for enhanced stability. It's a tight fit, so you'll need to heat the hex head of the screw and press it gently into the printed part. Here's what you'll need to build your own: (Links are exemplary) 2 x 32mm toggle clamps https://de.aliexpress.com/item/32mm-Plunger-Stroke-Metal-Push-Pull-Toggle-Clamp-227Kg-500-Lbs/32753112723.html 12 x 2020 L connectors https://de.aliexpress.com/item/10PC-T-slot-L-type-90-degree-EU-standard-2020-aluminum-profile-Inside-corner-connector-bracket/32799109924.html 2 x 500mm 2060 aluminum extrusion profiles [or more depending on your measurements] https://de.aliexpress.com/item/2060-aluminum-extrusion-profile-european-standard-length-500mm-aluminum-profile-workbench-1pcs/32830372532.html 34 x M4 t-nuts https://de.aliexpress.com/item/10PCS-M5-Hammer-Nut-Aluminum-Connector-T-Fastener-Sliding-Nut-Nickel-Plated-Carbon-Steel-for-2020/32623642406.html 34 x M4x10 allen bolts (for corner brackets and plates) 8 x M4x40 allen bolts (for toggle clamps) 8 x M5 washers (for toggle clamps with M4 bolts) Assembling everything should be straightforward. The tablet mount is optional, requiring 1 x M4x10 bolt, 1 x M4 washer, and 1 x t-nut. Have fun printing!