Threaded Cam Lock Cylinder

prusaprinters

<p>This lock has a spring loaded wafer that locks the cylinder core in position until the key is inserted. &nbsp;The tailpiece slips onto the inside end of the core and can be held in place with a screw. &nbsp;The pilot hole is designed for a #8-32 machine screw (needs to be tapped before screwing in the screw), but an M4 screw would also work. &nbsp;The tailpiece is a tight fit, so a screw is not necessarily needed.</p><p>The lock fits a standard cam lock opening, and the nut will hold it in place. &nbsp;Careful not to tighten too much! &nbsp;The lock cylinder will snap (I discovered the hard way…) &nbsp;Use a 7/8" wrench or socket on the nut.</p><p>The print is set up for PLA, with solid infill, 0.2mm quality. &nbsp;Hollow is not strong enough.</p><p>Any feedback is welcome!</p>