Thinner Cherry MX Switch Opener Legs

thingiverse

Designed this even thinner legs for my everglide aquakings v3 switches based on the steeper and thinner legs from JustSayBoot. The original legs were unusable and even the improved remixed version was still too thick, the legs got stuck on the bottom housing. The thinner legs are strong enough in PLA and wont break, the main reason for this is the smart design from Avatar7. ###Parts: - Legs: You need this part two times, printing them one by one results in better quality if you use a FDM printer. - Base: The base part is identical and can be taken from Avatar7:https://www.thingiverse.com/thing:4532633 - UpdatedBase: After opening some switches, I though a base which brings the two legparts closer together would be better. It makes the switch placement on the opener easier, because it fits the openerlegs tighter against the switch housing and prevents the legs from not gripping the switchlatches correctly. the -0.5mm base works very well, the bottom housing can move freely and its not possible for the legs to slide above the switchlatches. the -1mm base works also well, but clamps to the switch bottom... which could be preferred by some users. ###Print: - Legs: Switches will open smoother if you print it in a finer resolution (0.1mm was great for me, but 0.2mm was useable too) 40% infill a little higher temperature (~10°c) is recommended, it increases the stability. - Base: Base is fine with 0.2mm 20% infill ###Tested on: Ender 3 with PLA.

Download Model from thingiverse

With this file you will be able to print Thinner Cherry MX Switch Opener Legs with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Thinner Cherry MX Switch Opener Legs.