Thing-topus Thing Hand plus Mini Octopus

prusaprinters

My family and I had some fun with this one.  I didn't create this model from scratch, I merged this model in PrusaSlicer 2.5.2 using "The Thing - Family Adams" by yassine reyan from MyMiniFactory.com and the Cute Mini Octopus.I cut the head off of the mini octopus with the cut tool in Prusa Slicer, then added the .stl of Thing from the Adams Family, centered them together, and that's about it.  No supports were used in printing for the picture of the print that you see.  We did use a brim, to make sure the tentacles would stick good to the build plate.  We tried it without a brim, and it wouldn't stick (but that could have been my fault because the first print wasn't a hot enough nozzle temp @ 195 degrees C).  We increased the nozzle temp to 201 degrees C, and it printed flawlessly. I printed it on the Prusa MK3S+ .2mm layer height, 10% infill Gyroid, 8mm brim, random seam position, Anycubic Green PLA 210 degrees C, .4mm nozzle diameter, no supports.